Kuhnke HL618 Linear Solenoid Datasheet (EN)

Email: sales@impulseautomation.co.uk Website: www.impulseautomation.co.uk HL618 Series Linear Solenoid Push & Pull Type Linear solenoid Order specifications Design type Return spring Flying leads (10 cm standard length) Coil terminals Plug connector (6.3 x 0.8 DIN 46247; optional) Nominal voltage (standard voltage) 1) Perm. duty cycle under air cooled conditions (LK) 2) 1) Other voltages up to max. 220 V DC on request. 2) Other ED than 100 % ED on request. Weight: Complete solenoid: appr. 390 g Armature: appr. 90 g Standard: Voltage: 24 V DC Flying leads: 10 cm Insulation class: B (max. permissible temperature = 130 ° C) Service-free DU armature bearing for maximum durability.

Return spring optional. Solenoids with order specification HL618-R-... are available with return spring F (0 mm) = 2.2 N and F (20 mm) = 0.9 N. Observe correct mounting (armature weight). 3) If solenoid is mounted directly onto a flat metal surface the duty cycle can be extended (please ask for advice) 100 %ED Document LNSHL6/12 Revision 00 2 30 50 F/N 8 10 20 6 Force vs. Stroke diagram F = f (s) 5 40 20 10 Force measured when operating in horizontal position, at 90 % rated voltage and with winding at operating temperature 2 1 100 stroke s = 0 corresponds to armature in fully home position 0,5 Force vs.

stroke charac t eristics measured without return spring 0,1 0,2 0 5 10 15 20 s/mm Impulse Automation Limited United Kingdom Company Registration 665193 Information shown in these data sheets are for guidance purposes only, no liability is accepted for any errors or omissions. The designer or user is solely responsible for the safe and proper use of these parts, assemblies or equipment described. HL 618 – R – – F – 24 V DC 100 % ED HL 618 R F A 24 100 % ED 100 40 20 10 6 % Perm. duty cycle (ED)3) 12 31 50 96 140 W Nominal coil power P 20

Стр. 1

Email: sales@impulseautomation.co.uk Website: www.impulseautomation.co.uk HL618 Series Linear Solenoid Push & Pull Type 20 M4 Ш25 Dimensions given with armature in fully home position Direction of stroke Document LNSHL6/12 Revision 00 2 Impulse Automation Limited United Kingdom Company Registration 665193 Information shown in these data sheets are for guidance purposes only, no liability is accepted for any errors or omissions. The designer or user is solely responsible for the safe and proper use of these parts, assemblies or equipment described. 12+1 M4 30 30 45 20 38 30 45 20 38 20 Ø18 6 16 50 30,5 52,5 70 Ø18 6 6 16 30,5

Стр. 2