Руководство по эксплуатации Kuhnke RM20 Linear Solenoid (EN)

Email: sales@impulseautomation.co.uk Website: www.impulseautomation.co.uk RM20 Series Linear Solenoid Push & Pull Type Linear solenoid Order specifications Design type Return spring Flying leads (10 cm standard length) Coil terminals Nominal voltage (standard voltage) 1) Perm. duty cycle under air cooled conditions (LK) 1) Other DC voltages are available on request . Weight: Complete solenoid: appr. 60 g Armature: appr. 12 g Standard: Voltage: 24 V DC Flying leads: 10 cm Insulation class: B (max. permissible temperature = 130 ° C) Service-free DU armature bearing for maximum durability. Solenoids with order specification RM20- R-...

are available with return spring F (0 mm) = 1.2 N and F (3 mm) = 0.5 N. M3 M6 8 + 1 7 28 Dimensions given with armature in fully home position Direction of stroke 66,5 2) If solenoid is mounted directly onto a flat metal surface, an increase in relative duty cycle is permissible (please ask for advice) Document LNSM20/11 Revision 00 2 100 %ED F/N 50 20 Force vs.

Stroke diagram F = f (s) 5 10 5 15 25 Force measured when operating in horizontal position, at 90 % rated voltage and with winding at operating temperature 2 100 45 stroke s = 0 corresponds to armature in fully home position 1 0 1 2 3 s/mm Impulse Automation Limited United Kingdom Company Registration 665193 Information shown in these data sheets are for guidance purposes only, no liability is accepted for any errors or omissions. The designer or user is solely responsible for the safe and proper use of these parts, assemblies or equipment described. RM 20 – R – – F – 24 V DC 100 % ED RM 20 R F 24 100 % ED 8+ 1 12 SW14 Ø12 Ø16 Ø20 100 45 25 15 5 % Perm.

duty cycle (ED)2) 3,9 8 13,5 21 59 W Nominal coil power Pn 11 5 ms Actuation time (ED)

Стр. 1