L-4533A/L-4533AW/L-4033A/L-4033AW Operation Guide Introduction Pilot lamp L-4533A/L-4533AW L-4033A/L-4033AW 17 Letter Name Explanation f Key switch Changes the status of the press. P: Shutdown status (Use this to shut down the press.) Standby: Standby status (When a print job is sent, printing stands by until this is changed to Ready.) Ready: Printing possible status (holds the print jobs until the status becomes Ready.) g Pause switch Push to pause printing. h Start switch Push to start printing. Letter Name Explanation a Red lamp Lit when an error occurs and it enters a dangerous status.
U “Stopping Press Operations in an Emergency” on page 256 b Yellow lamp Lit when an error occurs and actions need to be taken. U “An Error is Displayed” on page 223 c Blue lamp Lit when the press has stopped and operations are required. d Green lamp Lit or flashing when the press is operating normally. ❏ Lit Indicates printing is in progress. ❏ Flashing Indicates a status other than printing. e Volume adjustment lever (L-4033A/L-4033AW only) Adjust the volume for error alarms and information sounds.