STARTING AND DRIVING ■ Press and release the acceleration/deceleration key on the left keypad of the steering wheel, to increase/decrease the vehicle speed by 5 km/h each time. Press and hold to increase/ decrease the vehicle speed by 1 km/h continuously. ■ Adjust the cruise speed via the acceleration/deceleration key on the left keypad of the steering wheel until the desired value is reached (the speed at this time is the set cruise speed). CC can be put in standby mode temporarily and then resumed. VESPER Deactivating CC Press the set key to disable CC temporarily.
A temporary increase of speed by depressing the accelerator pedal, such as accelerating during overtaking, does not affect the setting. The vehicle speed returns to the last stored value when the accelerator pedal is released. Automatic standby mode CC is disabled temporarily when one of the following occurs: Warning! ■ Depress the brake pedal. ■ The gear lever is moved to N position. ■ The vehicle loses traction. The vehicle may not maintain the set speed when going up or down steep hills. If this happens, drive without the cruise control. You must take over the speed control in the above situations. Deactivating/resuming the cruise control (CC) 188