Chapter 6 Control Terminals MS300 Figure 6-8 Recommended models or dimensions for crimping terminals Unit: mm Table 6-2 6-5 Wire Gauge Manufacturer Model Name A (MAX) B (MAX) D (MAX) W (MAX) 0.25 mm2 [24 AWG] PHOENIX CONTACT AI 0,25- 8 YE 12.5 8 2.6 1.1 0.34 mm2 [22 AWG] PHOENIX CONTACT AI 0,34- 8 TQ 12.5 8 3.3 1.3 0.5 mm2 [20 AWG] PHOENIX CONTACT AI 0,5 - 8 WH 14 8 3.5 1.4 Recommended specifications and models for crimping tool: CRIMPFOX 10S - 1212045, Manufacturer: PHOENIX CONTACT DNT13-0101, Manufacturer:
DINKLE Terminals Terminal Function Description +24V Digital control signal common (Source) +24 V ± 10 % 100 mA MI1 – MI7 Multi-function input 1–7 Refer to Pr.02-01–02-07 to program the multi-function inputs MI1–MI7. Source Mode ON: activation current 3.3 mA ≥ 11 V DC OFF: cut-off voltage ≤ 5 V DC Sink Mode ON: activation current 3.3 mA ≤ 13 V DC OFF: cut-off voltage ≥ 19 V DC When Pr.02-00=0, MI1 and MI2 can be programmed. When Pr.02-00≠0, the functions of MI1 and MI2 act according to Pr.02-00 setting. When Pr.02-07=0, MI7 is pulse input terminal. MI7 uses pulse input, and the maximum input frequency=33 kHz.
You can use it as frequency command source or connect it to the encoder for motor closed-loop control. MI7 motor closed-loop control only supports VFPG control mode.