7 ． EtherNet/IP Connection Procedure 15 5 Select System Settings-Startup-Startup setting from the tree. The setting dialog box is displayed. Select the Communication Tab. 6 The Communication module select Dialog Box is displayed. Select EtherNet/IP from the Fieldbus pull-down list. Then, click the Apply Button. Click the Close Button to close the System Settings Dialog Box. * The data set in the System Settings Dialog Box as shown on the right becomes enabled after the settings are saved, and then the FZ5 Sensor Controller is restarted. 7 Select Data save from the Function Menu. 8 The Data save Dialog Box is displayed. Click the OK Button.