7 ． EtherNet/IP Connection Procedure 7.2. Setting Up the FZ5 Sensor Controller Set up the FZ5 Sensor Controller. 7.2.1. Parameter Settings Set the parameters for the FZ5 Sensor Controller. 14 1 Connect the Camera, Monitor, USB connected mouse, and the LAN cable to the FZ5 Sensor Controller. Connect the LAN cable at the other end to the Switching hub. Connect the power supply cable to the Power terminal. 2 Turn ON the power supply to the FZ5 Sensor Controller. 3 The Language setting Dialog Box is displayed on the Monitor connected to the FZ5 Sensor Controller only at the initial start. Select English and click the OK Button.
Confirm that your desired Language is selected and click the Yes Button. 4 Select System Settings from the Tool Menu in the FZ-PanDA Dialog Box on the Monitor.