7 ． EtherNet/IP Connection Procedure Additional Information For details on online connections to a Controller, refer to Section 5 Online Connections to a Controller of the Sysmac Studio Version 1 Operation Manual (Cat. No. W504). 22 5 The Communications Setup Dialog Box is displayed. Confirm that the Direct connection via USB Option is selected for Connection type. Click the OK Button. 6 Select Online from the Controller Menu. * If the dialog on the right is displayed, the model or version *Example of confirmation dialog box of the Controller does not match that of the project file.
Match the Controller model and version by changing the device settings of the project file, and then repeat the procedure from step 1 in this section. Close the dialog box by clicking the OK Button. * The model and version displayed on the confirmation dialog box differ depending on the Controller used and the device setting of the project file.