7 ． EtherNet/IP Connection Procedure 23 7 A confirmation dialog box is displayed as shown on the right. Confirm that there is no problem and click the Yes Button. * The displayed dialog depends on the status of the Controller used. Click the Yes Button to proceed with the processing. * The displayed serial ID differs depending on the device. 8 When an online connection is established, a yellow bar is displayed on the top of the Edit Pane. 9 Select Synchronization from the Controller Menu. 10 The Synchronization Dialog Box is displayed. Confirm that the data to transfer (NJ501 in the right dialog) is selected. Then, click the Transfer To Controller Button.
* After executing the Transfer To Controller, the Sysmac Studio data is transferred to the Controller and the data is compared.