CHECK FOR SQUARENESS OF : CORNERS BEFORE TIGHTENING When assembling the above pieces do not tighten the screws until you have checked all four cornerS of the assembly with your square. \ Instafl a third Shelf Board horizontally us_ngthe last two holes in the:top of each Track Bracket, The Shelf Brackets should be on the underside of the Shelf and sus pended from the Track Brackets by four 1-1/4 inch Pan head screws and four Hex nuts as shown. Before tightening the screws check the distance from the edge of the horizontal She{f Board to the front Shelf Board as shown.
The distance shouEd be equal when measured at both the left and rig ht side of the frame assembly, You should have one shelf board, two she If brac kets and their related hardware remaining. Thisshelf will be installed later, after you determine what type of work will be done. 6 ё