• DataMatrix ∗ Cell Size: Makes settings of the cell (module) size for DataMatrix. ∗ Number of Cells: Makes settings of the number of cells for DataMatrix. [ Minimize ]: Optimize the minimum number of cells automatically. [ Specify the Size ]: Change settings to the selected size. • DataMatrix(Rectangle) ∗ Cell Size: Makes settings of the cell (module) size for DataMatrix. ∗ Number of Vertical Cells: Specify the number of cells for DataMatrix in the vertical direction. ∗ Number of Horizontal Cells: Specify the number of cells for DataMatrix in the horizontal direction. [ Minimize ]: Optimize the minimum number of cells automatically. [ Specify the Size ]:
Change settings to the selected size. ❏ The following table shows the recommended value for the 2D symbol module. • Recommended value for setting the barcode/2D symbol font (2D symbol of stack type) - : Not supported. * 1 : Whether paper feed is performed during printing 2D symbol can be checked in [ Display Media Feed Position ] - [ Display Print Preview ] in the Print Preview function. For this function, see "Print Preview" on page 181 . *2: Specify when using PDF417.
174 Symbol Category Print Quality Print Status *1 Adjust Bar Width *2 Minimum Module [by 360 dpi] ANSI Grade D or higher ANSI Grade C or higher ANSI Grade B or higher PDF417 GS1 DataBar Stacked GS1 DataBar Stacked Omnidi- rectional GS1 DataBar Expanded Stacked Plain Media, Plain Media Label Speed No Paper feed 3 6 dot - - With Paper feed 6 dot - - Quality No Paper feed 6 dot - - With Paper feed 6 dot - - Fine Media, Fine Media Label, Synthetic Media Label, PET Film, Wrist Band Speed No Paper feed 4 dot - - With Paper feed 4 dot - *2 - Quality No Paper feed 4 dot - - With Paper feed 4 dot - *2 -