Chapter 4 Handling • Recommended value for setting the barcode/2D symbol font (2D symbol of matrix type) - : Not supported. * 1 : Whether paper feed is performed during printing 2D symbol can be checked in [ Display Media Feed Position ] - [ Display Print Preview ] in the Print Preview function. For this function, see "Print Preview" on page 181 . 4 *2: Only QRCode is confirmed. 3 Click [ Add ]. The selected 2D symbol font is saved and the font name is added to the font list. • The 2D symbol font can be registered up to 30. • The 2D symbol font setting can be overwritten by clicking [Save] after selecting the font name from the font list and changing the setting.
• The 2D symbol font setting can be deleted by clicking [Delete] after selecting the font name from the font list. • Test print is executed according to the setting by clicking [Print] after inputting the text in the box.
175 Symbol Category Print Quality Print Status *1 Minimum Cell Size [by 360 dpi] ANSI Grade D or higher ANSI Grade C or higher ANSI Grade B or higher AztecCode QRCode Plain Media, Plain Media Label Speed No Paper feed 6 dot - - With Paper feed 8 dot - - Quality No Paper feed 6 dot - - With Paper feed 8 dot - - Fine Media, Fine Media Label, Synthetic Media Label, PET Film, Wrist Band Speed No Paper feed 5 dot 6 dot *2 With Paper feed 6 dot 7 dot - Quality No Paper feed 5 dot 6 dot *2 With Paper feed 6 dot 7 dot -