English The autocutter is jammed 1. Pull the cutter cover toward you so that you can rotate the cutter motor knob. 2. Follow the instructions on the label, and rotate the knob until ▼ appears in the window. 3. Close the cutter cover. Removing Jammed Paper CAUTION: Do not touch the print head because it can be very hot after printing. Do not move the slip section print head carriage. 1. Turn the printer off and open the appropriate printer cover (either front or roll paper). 2. If the paper is jammed in the roll paper section, press the cover open button to open the cover. Then remove the jammed paper and put the roll back in the printer and close the cover.
If the paper is jammed in the slip section, open the front cover and remove the jammed paper. 3. If paper is caught in the automatic cutter in the receipt section and the roll paper cover cannot be opened, open the cutter cover toward you, as shown in illustration 8 . 4. Rotate the knob until ▼ appears in the window, as shown in illustration 9 . This returns the cutter blade to the normal position. There is a label near the cutter to assist you. 5. Close the cutter cover. 6. Open the roll paper cover and remove the jammed paper. TM-H5000II User’s Manual 11 8 9