Chapter 2 Setup Wireless LAN Interface Using Epson TM Utility, you can easily connect the printer to the network from an iOS or Android devices. We also recommend connecting using a USB cable from a Windows computer, and setting up the wireless LAN using the network setup tool (EpsonNet Config). • Examine the radio wave situation in the surrounding area before use. • Avoid using the same channel that is used in the neighboring shops where wireless LAN is used. • In the infrastructure mode, W53 and W56 channels are not available to connect to a stealth SSID access point.
• For detailed information about EpsonNet Config, see the EpsonNet Config manual (operation guide) or the EpsonNet Config online help. • If you configure the wireless LAN setting without using EpsonNet Config, use the network parameters printed on the dynamic status sheet. To print dynamic status sheet, see "Dynamic Status Sheet Print Mode" on page 58 . • To initialize the wireless LAN setting, see "Wireless module setup mode" on page 53 . 2 Setting up from a Smart Device Necessary Items Prepare the following items. • Printer: TM-P60II • Device for setting: iOS or Android device • Utility for setting:
Epson TM Utility for iOS/Android Running Epson TM Utility for iOS/Android 1 Run the Epson TM Utility for iOS/Android. 2 Set from “Wi-Fi ® Setup Wizard” in the menu. Setup and Operation Work flow 1. Select the network you want to connect to. 2. Enter the passkey. 3. Perform a test print. 37