Typical function options may include: Number of Keys, Read Pin Code, Remote Control Learning, Add Keys, Erase Keys, All Keys Lost, and Clear DTCs. 4.4 Maintenance This function provides you with 13 maintenance services including Oil Reset, Throttle Adaptation, (Electronic Parking Brake) EPB Reset, Steering Angle Reset, (Diesel Particulate Filter) DPF Regeneration, (Anti-lock Braking System) ABS Bleeding, (Battery Management System) BMS Reset, Injector Coding, TPMS Reset, Airbag Reset, Sunroof Initialization, Seat Calibration and Windows Calibration. 4.4.1 Services Overview Oil (Oil Reset) This function allows you to reset the oil service lamp for the engine oil life system.
The engine oil light system calculates an optimal oil change interval depending on the vehicle's driving conditions and weather events. Oil resets are required every time the engine oil is changed. Throttle (Throttle Adaptation) If the ECU is disconnected accidentally, or if the throttle is replaced or cleaned, then the throttle actuators need to be initialized via the Throttle Adaptation function. This resets the ECU's data to its initial state so that the throttle can accurately regulate the air intake. EPB (EPB Reset) This function helps you replace and reset the brake pads. It needs to be performed in the following cases:
• After the brake pads and brake pad wear sensors are replaced; • When the brake pad warning light is on; • After a short circuit in the brake pad sensor is fixed; • After the servo motor is replaced. Steering (Steering Angle Reset) If the steering angle sensor is replaced, or the steering angle is inaccurate or not centered, the steering angle reset function needs to be performed to find the relative zero position. With this position as a reference, the ECU can then calculate the exact angle for left and right steering. 31