4-2 Function Mode 4 Functions *1. The Inverter's rated current is "1000". *2. The second decimal place is ignored when the value is over 10000 (100.0 seconds). 4-79 Register No. Function name Parameter No. R/W function Data Resolution 002Ah 2nd deceleration time 1 F203 (HIGH) R/W 0 to 300000 *2 0.01 [s] 002Bh F203 (LOW) R/W 002Ch Operator rotation direction selection F004 R/W 0: Forward 1: Reverse 002Dh Frequency reference selection A001 R/W 0: Digital Operator (volume) 1: Terminal 2: Digital Operator 3: ModBus communication 002Eh RUN command selection A002 R/W 1: Terminal 2: Digital Operator 3: ModBus communication 002Fh Base frequency A003 R/W 30 to Max. frequency 1.
[Hz] 0030h 2nd base frequency A203 R/W 30 to 2nd max. frequency 1. [Hz] 0031h Maximum frequency A004 R/W 30 to 400 1. [Hz] 0032h 2nd maximum frequency A204 R/W 30 to 400 1. [Hz] 0033h FV/FI selection A005 R/W 0: FV/FI 1: Disabled 2: FV/VR 3: FI/VR 0034h FV start frequency A011 R/W 0 to Max. frequency 0.1 [Hz] 0035h FV end frequency A012 R/W 0 to Max. frequency 0.1 [Hz] 0036h FV start ratio A013 R/W 0 to 100 1. [%] 0037h FV end ratio A014 R/W 0 to 100 1. [%] 0038h FV start selection A015 R/W 0: External start frequency 1: 0 Hz 0039h FV, FI sampling A016 R/W 1 to 8 1 003Ah Multi-step speed reference 0 A020 R/W 0/Starting frequency to Max.
frequency 0.1 [Hz] 003Bh 2nd multi-step speed reference 0 A220 R/W 0/Starting frequency to 2nd max. frequency 0.1 [Hz] 003Ch Multi-step speed reference 1 A021 R/W 0/Starting frequency to Max. frequency 0.1 [Hz] 003Dh Multi-step speed reference 2 A022 R/W 0/Starting frequency to Max. frequency 0.1 [Hz] 003Eh Multi-step speed reference 3 A023 R/W 0/Starting frequency to Max. frequency 0.1 [Hz] 003Fh Multi-step speed reference 4 A024 R/W 0/Starting frequency to Max. frequency 0.1 [Hz] 0040h Multi-step speed reference 5 A025 R/W 0/Starting frequency to Max. frequency 0.1 [Hz]