en Preparation Fig. D Caution: Empty the bowl before it becomes so full that the chopped or grated food reaches the carrier disc. • Place the bowl on a smooth, clean work surface and press down. • Place the required insert into the carrier disc. Note the shape and position of the insert (fi g. D-1a). • Place the carrier disc onto the pivot on the base of the bowl. • Place the drive unit on the bowl with the pusher inserted (align arrow a on the drive unit with any catch b on the bowl) and turn in an anti-clockwise direction until it clicks into place. Whisk For whipping cream, whisking eggs, and frothing milk (cold milk, max. 8 °C, or hot milk, approx. 60 °C). Caution:
Only connect and remove the drive unit to/from the whisk when the appliance has come to a complete stop. Preparation Risk of injury due to sharp blade. Never insert fi ngers into the fi lling hole during operation. Always use the pusher ( 13 ) to push ingredients into the beaker. Fig. E • Fill the mixing beaker with food. • Insert the mixer foot into the basic unit and click into place. • Push the whisk into the drive unit and click into place. • Plug in the mains plug. • Hold the basic unit and mixing beaker fi rmly and press the On/Off switch. • Use the speed control to prevent the mixed food from spraying out. • When you have fi nished processing, release the On/Off switch.
• Unplug the mains plug When you have fi nished • Place the basic unit on the drive unit and allow to click into place. • Plug in the mains plug. • Hold the basic unit and the bowl fi rmly and switch on the appliance. Set the required speed. First switch on the appliance, set the speed, and then place the food to be chopped or grated in the bowl. • Fill the bowl with the food to be chopped or grated. • Push the food to be chopped or grated applying only light pressure on the pusher. • Switch off the basic unit and disconnect the mains plug. • Removing the mixer foot: Press the release buttons and remove the basic unit from the mixer foot. • Removing the multi-function accessory and tools:
- Press the release buttons and remove the basic unit from the drive unit. - Turn the drive unit clockwise and remove from the bowl. - If using the universal blade: Only handle and remove the universal blade using the plastic part. - If using the carrier disc with cutting insert: Only handle and remove Do not exert excess pressure onto the food to be chopped or grated (e.g. hard cheese) using the pusher (13), otherwise the appliance may switch off due to overload, see »Troubleshooting«. • Remove the pusher and add the ingredients through the fi lling opening. • When you have fi nished processing, release the On/Off switch. • Unplug the mains plug Robert Bosch Hausgerдte GmbH 13