en the carrier disc using the recessed handles. Rotate the carrier disc and carefully push out the insert from the underside (fi g. F). Caution: Never immerse the drive unit of the multi- function accessory in water and do not put it in the dishwasher. The detachable shaft can be briefl y rinsed under running water. If the recessed handles make it diffi cult to remove the carrier disc, you can take remedial action using a dry cloth or paper towel. • Removing the whisk: - Remove the whisk from the drive unit. - Press the release buttons and remove the drive unit from the basic unit. • Clean all parts, see »Cleaning and care«.
Cleaning and care • The bowl, pusher, cutting inserts, carrier disc for disc inserts and blade are all dishwasher-proof. • Wipe the drive unit with a damp cloth or rinse briefl y under running water. Cleaning the whisk Caution: Never immerse the drive unit in water and do not clean in the dishwasher or under running water. Risk of electric shock: Never immerse the basic unit in water and do not clean in the dishwasher. Do not use steam cleaners. This may damage surfaces. Do not use abrasive cleaning agents. • The whisk can be washed in the dishwasher, the drive unit should be wiped using a damp cloth.
Troubleshooting When processing carrots or red cabbage, for example, the plastic parts may become stained. These stains can be removed using a few drops of cooking oil. Cleaning the basic unit • Unplug the mains plug. • Wipe the basic unit with a damp cloth and rub dry. • The mixing beaker can be cleaned in the dishwasher. • Place the mixer foot in the dishwasher in an upright position (mixing foot blade at the top) or clean with a brush under running water. • Allow the mixer foot to dry in an upright position, to allow water to drain out. Cleaning the multi-function accessory and tools If the fault is not resolved, please contact our after-sales service.
Disposal Risk of injury due to sharp blade. Only handle the universal blade using the plastic handle. Only handle the carrier disc using the recessed handles provided. This appliance has been identifi ed in accordance with the European directive 2002/96/EG on Waste 14 Robert Bosch Hausgerдte GmbH Fault Remedy Appliance swit- ches off during operation or the speed display begins to fl ash. The overload safety device has been activated. • Switch off the appliance and disconnect the mains plug. • Allow the appliance to cool for approx. 1 hour to deactivate the overload protection. • Switch the appliance back on again.