2. Wipe away excess dust and debris from the tangle-free brush bar, suction opening, and transparent plastic cover using a dry cloth or paper towel. Cleaning the Electric Mite Brush Note: The tangle-free brush bar contains an electric motor. Do not clean it with water. 1. Use a coin to turn the lock counterclockwise until you hear a click. 2. Remove the roller brush from the electric mite brush, then rinse and clean it. 3. Reinsert the roller brush in the direction shown and firmly press the end cap until it clicks into place. Roller Brush 3. Allow the roller brush to dry thoroughly by standing it upright in a well- ventilated area for at least 24 hours.
Once the roller brush is dry, reinstall it by following the disassembly steps in reverse. 24h 12