HOME sm01017 8 9 10 4 5 6 3 11 12 1 2 1 7 13 18 19 14 15 16 20 17 11. 1. Rear exhaust alignment mark (four dots and line) Front exhaust copper link 2. 12. Front exhaust EX timing dot Rear exhaust cam lobe position 13. 3. Rear exhaust EX timing dot Front exhaust alignment mark (single dot and line) 4. 14. Front intake alignment mark (two dots and line) Rear exhaust copper link 15. 5. Triple sprocket Front intake IN timing dot 6. 16. Front intake copper link Twin cam drive chain copper links 17. 7. Triple sprocket to crankcases alignment marks Rear intake IN timing dot 8. 18. Rear intake copper link Front intake cam lobe position 19. 9.
Front exhaust cam lobe position Rear intake cam lobe position 10. 20. Rear intake alignment mark (three dots and line) Front piston at TDC Figure 3-49. Cam Drive Timing Marks (secondary cam chain tensioners are not shown) sprocket teeth with the copper chain links (16) straddling the triple gear timing mark. • Crankshaft must be at front cylinder TDC with TDC POS- NOTES . Lubricate cam journals, lobes, and tap- • 5. 2009 VRSC Service: Engine 3-29 ITIONING TOOL (Part No. HD-45653) in place. 6. See Figure 3-50. Lubricate cam Even though cam tim not appear in the po are used only to aid i See Figure 3-49. Inse from the rear head.W