HOME Figure 3-70. Valve Guide Dimensions sm01050 sm01046 12. See Figure 3-72. Use VALVE GUIDE REAMER (Part No. HD-45319) to return installed guide to correct dia- meter. 13. See Figure 3-73. Use VALVE GUIDE FLEX HONE (Part No. HD-45321) to get the correct surface finish for proper valve stem-to-guide fit and lubrication. 14. See Figure 3-74. Clean valve guide with VALVE GUIDE CLEANING BRUSH (Part No. HD-34751). 15. See Figure 3-75.Verify stem to guide clearance is correct after reaming. 16. Clean valve stem bore and insert 6 MM PILOT (Part No. HD-35758-51) in bore. NOTE ALWAYS clean valve stem bore before inserting pilot. Clean bores of all valve guides not replaced as well.
sm01048 Figure 3-72. Ream Valve Guide VALVE GUIDE REAMER (Part sm01047 Figure 3-73. Hone V Figure 3-71. Valve Guide Installation 3-38 2009 VRSC Service: Engine Figure 3-73. Hone V alve Guide Installation e: Engine Figure 3-71. V 3-38 2009 VRSC Servic