HOME sm01105 sm01118 Figure 3-120. Inspect Small End Figure 3-122. Piston Orientation Mark 18. See Figure 3-121 . Measure piston diameter on thrust surface. 20. See Figure 3-123 .FLYWHEEL SUPPORT FIXTURE (Part No. HD-44358) can be modified to hold crankshaft when removing or installing primary drive gear. Open bore of center hole to 59.7 mm (2.350 in.). 19. See Figure 3-122 . EX on piston top goes toward the exhaust valves. Front piston EX will go toward the front of the engine. Rear piston EX will go toward the rear of the engine. 21. See Figure 3-124 . Remove and discard primary drive gear fasteners. sm01117 Figure 3-121. Piston Measurement 3-54 2009 VRSC Service: Engine