HOME Figure 3-148. Lubricate Crankshaft and Rods 49. See Figure 3-149 . Tighten connecting rod caps to 27 Nm (20 ft-lbs). 50. See Figure 3-150 . Position the Torque Angle Gauge (Snap-on Part No.TA360) per instruction sheet and tighten connecting rod bolts an additional 90 degrees. NOTE The notation for this torque sequence is written: 27 Nm + 90 degrees. 3-62 2009 VRSC Service: Engine sm01149 cting Rod Caps sm01150