2009 — Crankshaft, Piston and Cylinder Liner Removal/Installation

HOME 41. See Figure 3-143 . Crankshaft counter weight is stamped with the original color code for main bearing and rod journal replacement sets. Read from left to right, the letter code corresponds to the alternator and clutch side main bearing journals (2) and the front rod and rear rod journals (3). sm01147 42. Refer to Table 3-24 . Select main bearing set corresponding to color code on crankshaft. NOTE Always measure all bearing surfaces before selecting and installing bearings. Table 3-24. Rod Bearing Journal Diameter CLUTCH SIDE Figure 3-145. Install Crankshaft 55.952 mm 55.946 mm 44. See Figure 3-145 . Carefully position crankshaft. 45. See Figure 3-105 .

When crankshaft is in position, install 55.959 mm 55.952 mm CRANKSHAFT ASSEMBLY RETAINER (Part No. HD- 45316). 55.965 mm 55.959 mm sm01148 NOTE Main bearings are available in 3 sets (alternator and clutch side bearings) to fit three sizes of journals. The sets are color coded blue (B), green (G) and red (R). sm01105 Figure 3-146. Position Connecting Rods 46. See Figure 3-146 . Pull piston and rod assembly up to crankshaft journal. Figure 3-144. Lubricate Crankshaft Bearings 47. See Figure 3-148 . Lubricate crankshaft journal, connecting rod cap bearings, connecting rod bolt threads and under head of rod cap bolt with Harley-Davidson Motorcycle Oil 20W50.

In addition, a thin film of Lubriplate No. 105 Motor Assembly Grease (NAPA Part No. 765-2651) is recom- mended for the rod bearings. 43. See Figure 3-144 . Install crankshaft bearings and lubricate bearing surface with Harley-Davidson Motorcycle Oil 20W50. In addition, a thin film of Lubriplate No. 105 Motor Assembly Grease (NAPA Part No. 765-2651) is recom- mended. 48. See Figure 3-147 . Install connecting rod caps. Confirm connecting rods and caps have identical numbers and cast bumps are oriented correctly. a. Front cylinder connecting rod and cap bumps to cam drive side of engine. b. Rear cylinder connecting rod and cap bumps to water pump side of engine. 2009 VRSC Service:

Engine 3-61 COLOR CODE H-D PART NO. ALTERN- ATOR SIDE Blue 24411-01K Max 55.977 mm Min 55.971 mm Green 24410-01K Max 55.984 mm Min 55.977 mm Red 24409-01K Max 55.990 mm Min 55.984 mm