2009 — Removal/Installation

HOME 3.12 OIL PUMP REMOVAL/INSTALLATION 5. Thoroughly lubricate internal pump components with Harley-Davidson Motorcycle Oil 20W50 prior to installation. 1. Remove clutch cover. See 6.2 CLUTCH . 2. See Figure 3-151 . Remove three fasteners (4) holding oil pump (1) to case. 6. See Figure 3-151 . Install new O-rings (2, 3) and lubricate with Harley-Davidson Motorcycle Oil 20W50. 3. Pull pump straight out to remove from engine. 7. Install pump and tighten three fasteners (4) to 9.7 Nm (86 in-lbs ). 4. Remove O-rings (2, 3). 8. Install clutch cover. See 6.2 CLUTCH . 3-64 2009 VRSC Service: Engine sm06239 1 2 3 4 1. Oil pump assembly 2. O-ring 3. O-ring 4. Fastener (3) Figure 3-151. Oil Pump 1.

Oil pump assembly 2. O-ring 3. O-ring 4. Fastener (3) Figure 3-151. Oil Pump