HOME 3.13 OIL FILTER MOUNT REMOVAL/INSTALLATION 1. See Figure 3-152 . Remove three fasteners and remove oil filter mount. sm01152 2. See Figure 3-153 . Remove O-ring and discard. 3. Inspect oil passages for debris and dirt. Clean as required. 4. Install new O-ring and install oil filter mount. NOTE Always replace O-ring when oil filter mount has been removed and/or replaced. 5. Tighten oil filter mount fasteners to 9.7 Nm (86 in-lbs ). sm01151 Figure 3-153. Replace O-Ring Figure 3-152. Remove Oil Filter Mount Fasteners 2009 VRSC Service: Engine 3-65