2009 — Removal

HOME 4.15 EXHAUST SYSTEM: VRSCDX REMOVAL 1. Remove right side cover and remove main fuse. See 7.4 MAXI-FUSE . 2. See Figure 4-39 . Loosen clamp (24). 3. Remove passenger right side footrest assembly. See 2.8 RIDER FOOTRESTS AND FOOT CONTROLS . To prevent accidental vehicle start-up, which could cause death or serious injury, remove main fuse before pro- ceeding. (00251b) 4. See Figure 4-40 . Remove exhaust bracket fastener from passenger right side footrest. • The exhaust system can be removed as a complete unit from the tubes back, however it will also be necessary to remove the heat shields from volume assembly. NOTES 5. Remove lower muffler mounting fastener. 6.

Remove AV mounting fastener. • The VRSCDX uses a unique finish on some exhaust system components. Improper care and handling during the disassembly/assembly process can cause permanent cosmetic finish damage. 7. Holding exhaust system firmly, use an up and down motion at the back of the mufflers while pulling exhaust system back and away from tubes until exhaust system is free from motorcycle. 8. See Figure 4-41 . Note lower support fastener locations. It is not necessary to remove this bracket from motorcycle. 4-30 2009 VRSC Service: Fuel System