2009 — Installation

HOME sm06224 Connect positive (+) battery cable first. If positive (+) cable should contact ground with negative (-) cable connected, the resulting sparks can cause a battery explosion, which could result in death or serious injury. (00068a) 1 2 Connect the cables to the correct battery terminals. Failure to do so could result in damage to the motorcycle electrical system. (00215a) 4 3 Do not over-tighten bolts on battery terminals. Use recommended torque values. Over-tightening battery ter- minal bolts could result in damage to battery terminals. (00216a) 3 4. Install the negative battery cable. Tighten to 6.8-10.8 Nm (60-96 in-lbs ). 5. Install maxi-fuse and right side cover. 1.

Oil line bracket 2. Oil line to crankcase 3. Oil cooler to radiator fasteners 4. Oil line from oil cooler 6. After running engine: a. Inspect oil pipes and fittings for oil leaks. b. Check oil level and add oil if required. c. Check coolant level in overflow bottle with coolant cold and motorcycle on jiffy stand and add coolant if required. Figure 5-26. Radiator and Oil Cooler Assembly 2009 VRSC Service: Cooling System 5-25