HOME sm03640 sm03641 Figure 6-5. Clutch Hub Nut Retaining Ring Figure 6-4. Lifter Guide hub. Figure 6-6. Clutch Hub Holder Dowel Pin Position NOTES • It may be necessary to rotate engine slightly to properly engage the clutch hub. • clutch hub and/or threads. 6-4 2009 VRSC Service: 7. See Figure 6-6. Install CLUTCH HUB HOLDER (Part No. HD-48625).The clutch hub holder can only be installed in one position. The engine case dowel pin must match the hole in the tool. NOTE Use CRANKSHAFT ROTATING WRENCH (Part No. HD- sm03642 45314) to rotate engine. rotate result. b.
ot be broken under normal conditions thods, apply moderate heat or use h ONLY TO LOOSEN clutch hub e to do so may result in damaged eads. Figure 6-7.Tool and Hub P : Transmission roperly Engaged