HOME sm00884 7 5 1 4 3 2 6 6 8 5 1 4 3 2 6 6 1. 1st gear 2. 2nd gear 3. 3rd gear 4. 4th gear 5. 5th gear 6. Bearing alignment pins Figure 6-33.Transmission Input Shaft and Output Shaft Assemblies Shift Drum Removal 1. See Figure 6-34 . Remove input shaft bearing retainer to fully expose shifting fork shaft. 2. See Figure 6-35 . Remove neutral switch. 3. See Figure 6-36 . Using a drift pin, pull shifter fork shaft to edge of case to free shifter forks. NOTE Shafts in the transmission are closely toleranced. Insertion of shafts must be done by hand. NEVER use a hammer or other tool to remove or install shafts.Transmission damage will result if force is used to insert shafts.
sm00714 earing Retainer ice: Transmission 6-13