2009 — Disassembly

HOME 6.3 TRANSMISSION DISASSEMBLY 2. Remove two fasteners on drive sprocket flange seal retainer. TOOL NAME PART NUMBER SHIFT MECHANISM/DENTENT RETRACTOR HD-45339 3. See Figure 6-32 . Remove output shaft. 4. See Figure 6-31 . Note the alignment pins on the bearing outer race. If the pins are damaged or missing the bearing must be replaced. See 6.6 OUTPUT SHAFT . Figure 6-31. Input Shaft 6-12 2009 VRSC Service: Transmission Whenever case halves are separated for service, crank- shaft bearings must be replaced. Failure to replace bear- ings will result in engine damage. (00551b) 1. See Figure 6-31. Remove input shaft. See Figure 6-33. Note the alignment pins on the bearing outer race.

If the pins are damaged or missing the bearing must be replaced. sm00711 sm00716 Figure 6-32. Output Shaft