2009 — Removal

HOME sm00778 14. Position upper puller half around inboard inner bearing race. Slide connecting collar over the halves. 15. See Figure 6-76 . Turn push screw to remove inboard bearing inner race. 16. See Figure 6-77 . Using a HD-34902-7 tool fromBIG-TWIN MAINSHAFT PRIMARY BEARING RACE REMOVER AND INSTALLER (Part No. HD-34902-B) position end cap over end of outboard of countershaft balancer shaft and remove the outboard bearing, inner race.. sm00781 Figure 6-72. Bearing Removal Insert sm00779 Figure 6-73. Position Puller Figure 6-75. Counterbalancer Bearing Inner Race Remover and Installer (HD-46582) sm00780 Figure 6-74. Remove Bearing 13. unterbalancer beari ce the inner race.

See Figure 6-75. Fit t NOTE ngs are being replaced, ALWAYS he lower half of the COUNTERBAL- INNER RACE REMOVER AND . HD-46582) with pin hole over back h screw into hole of lower puller half. e: Transmission ANCER BEARING INSTALLER (Part No . HD-46582) of inner race. Fit pus 2009 VRSC Servic