2009 — Assembly - 2nd Gear End

HOME sm00816 sm00819 Figure 6-113. 5th Gear ASSEMBLY - 2ND GEAR END Figure 6-116. Hardened Washer 3. See Figure 6-116. Install hardened washer. sm00817 4. To complete output shaft assembly - 2nd gear end, go to 6.7 INPUT SHAFT, Disassembly - 2nd Gear End. Bearing Removal - 1st Gear End sm00820 Figure 6-114. 5th Gear Installation 1. See Figure 6-114. Install 5th gear ground washer and split cage bearing. sm00818 Figure 6-117. 1st Gear Bearing Retaining Ring Wear safety glasses or goggles when removing or installing retaining rings. Retaining rings can slip from the pliers and could be propelled with enough force to cause serious eye injury. (00312a) 5. See Figure 6-117.

Remove the retaining ring from the 1st gear bearing end of the output shaft. Figure 6-115. 2nd Gear Installation 2. See Figure 6-115. Install 2nd gear. Note 2nd gear pockets are installed toward the 5th gear engagement dogs. 6-38 2009 VRSC Service: Transmission . 2nd Gear Installation tall 2nd gear. Note 2nd gear pockets he 5th gear engagement dogs. : Transmission Figure 6-115 2. See Figure 6-115. Ins are installed toward t 6-38 2009 VRSC Service