2009 — Disassembly - 2nd Gear End

HOME Figure 6-136. 2nd Gear Bearing Retaining Ring 2. See Figure 6-136 . Install retaining ring. 6-44 2009 VRSC Service: Transmission sm00837 Figure 6-135. 2nd Gear Bearing Alignment Pin sm00835 sm00838 Figure 6-137. 2nd and 5th Gear Removal 3. See Figure 6-137. Place a puller clamp behind 5th gear and press off 2nd and 5th gear. Support the input shaft when removing the gears. NOTE 2nd gear is an interference fit and MUST be replaced when removed from the input shaft regardless of its condition. sm00839 Figure 6-138. Splined Thrust Washer 4. See Figure 6-138. Remove the splined thrust washer.