2009 — Replacement

HOME 7.4 MAXI-FUSE There is a main battery fuse to protect the motorcycle wiring. sm04535a 4 This 40-amp maxi-fuse provides main battery power to the motorcycle. It is located in a rubber-coated fuse holder behind the motorcycle's right front side cover. REPLACEMENT 1 1 1. See Figure 7-5. Remove the fastener (1) securing the side cover (2). Carefully lift the side cover off the mounting tabs and set it aside. 2. Grasp the fuse holder in one hand, the plastic body of the maxi-fuse (3) in the other, and pull the maxi-fuse straight out of the fuse holder. 2 3. Insert the prongs of the new maxi-fuse in the fuse holder slots. Push the maxi-fuse firmly down into the fuse holder. 4.

Replace the side cover and install the fastener. Tighten to 4.1-6.8 Nm (36-60 in-lbs). 5 1 2 3 1. Fastener 2. Side cover 3. Maxi-Fuse (40 amp) 4. VRSCF models 5. Models except VRSCF Figure 7-5. Maxi-Fuse 7-6 2009 VRSC Service: Electrical 5. Models except VRSCF Figure 7-5. Maxi : Electrical -Fuse