2009 — Autofuse Connector Repair

HOME A.2 AUTOFUSE ELECTRICAL CONNECTOR AUTOFUSE CONNECTOR REPAIR TOOL NAME PART NUMBER sm02849 SNAP-ON TERMINAL PICK GA500A General Autofuse electrical connector terminals are found in ignition switches and some fuse blocks. Disassembly 1. Obtain SNAP-ON TERMINAL PICK (Part No. GA500A). 2. See Figure A-8 or Figure A-9 . Insert smallest pair of pins into chamber on mating end of socket housing to depress tangs on each side of terminal simultaneously. 3. Gently pull on wire to remove terminal from wire end of socket housing. 4. If necessary, crimp new terminals on wires. Figure A-8. Removing Autofuse Terminal from Ignition Switch Assembly 1.

Using a thin flat blade, like that on a hobby knife, carefully terminal body. 2. in place. Figure A-9. Removing Autofuse Terminal from Fuse Block 2009 VRSC Service: Appendix A Connector Repair A-5 n a hobby knife, carefully inal outward away from al facing rib on wire end into chamber until it locks sm03480