HOME 7. Tighten banjo bolt to ABS module to 17-20 Nm (12.5-14.7 ft-lbs). 11. Install right side radiator cover. See 1.6 RADIATOR SIDE COVERS . 8. Install main fuse. See 1.6 RADIATOR SIDE COVERS . 12. Install exhaust system from motorcycle. See 4.14 EXHAUST SYSTEM:VRSCAW . See 4.16 EXHAUST SYSTEM: VRSCF . See 4.15 EXHAUST SYSTEM: VRSCDX . 9. Fill and bleed brake system. See 1.12 BLEEDING BRAKES . 10. If more than one brake line was removed: a. Confirm that brake system is properly connected. To accomplish this, install master cylinder reservoir cover, connect motorcycle to DIGITAL TECHNICIAN II (Part No. HD-48650) and perform "ABS Setup" procedure in the "Toolbox" menu. b.
Repeat bleeding procedure if brakes still feel spongy. 2009 VRSC Service: Appendix C ABS C-9