HOME sm04537 Figure 1-79.Top Dead Center Positioning Tool sm01840 1 1 8 3 2 9 1 1 5 7 4 6 1. Copper links (may not appear where illustrated) 2. Front exhaust alignment mark (single dot and line) 3. Front intake alignment mark (two dots and line) 4. Rear intake alignment mark (three dots and line) 5. Rear exhaust alignment mark (four dots and line) 6. Front exhaust cam lobe position 7. Front intake cam lobe position 8. Rear intake cam lobe position 9. Rear exhaust cam lobe position Figure 1-80.TDC Cam Timing Orientation NOTE LASH ADJUSTMENT See Figure 1-80 NUMBER TOOL NAME 314 CRANKSHAFT ROTATING WRENCH HD-45314 CRANKSHAF nstallation of cam chains. HD-45340 GASKET ALI 1. See Figure 1-81.
Using CR WRENCH (Part No. HD-4531 toward front cylinder (direction front cylinder cam lobes at 10 o : Maintenance 314 CRANKSHAF 340 GASKET ALI GNMENT DOWELS CR ANKSHAFT ROTATING RENCH (Part No. HD-4531 4)