Final assembly Exhaust-air mode: ❑ Stick the enclosed covering foil over the air outlet grille on the top of the extractor hood. Ensure that the surface is clean. ❑ ❑ ❑ ❑ Connect the pipes. ❑ Connect to the power supply. ❑ Insert the filter grille (see Instructions for use). Design changes with respect to technical development shall remain withheld. 28 motor extractor hood electing the operating mode: Exhaust-air mode: Position 1 Circulating-air mode: Position 2 Select the operating mode on the left or right with a screwdriver. 2 1 Weight in kg: Width Exhaust air Circulating air 50 cm 7,0 8,0 60 cm 1 motor 8,0 9,0 60 cm 2 motors 10,0 11,0 90 cm 13,0 14,0