Failing Type of Checks to be Measuring Values to be DTC FMI Visible failure Possible Cause Repair action Remarks component Failure performed conditions detected 2AF SERIOUS No effect per- Problems in Ad- Check the faults in the EOBD ceived by the Blue dosing sys- Denoxtronic and con- FAULT driver. tem. sult the control unit FROM DE- troubleshooting guide. NOX- TRONIC (EOBD FLASHING LIGHT) 2B4 TIMEOUT No effect per- CAN configur- Check CAN line wiring. CAN ceived by the ation incorrect. Check BC wiring and MESSAGE driver. CAN connec- operation. BC2EDC2 tions defective. Terminal resis- tance not suit- able.
2C6 TIMEOUT No effect per- CAN messages Check the TCU con- OF CAN ceived by the from TCU nection with the CAN MESSAGE driver. (Transmission line. TSC1-PE Control Unit) in- PASSIVE consistent. 2C8 ERROR No effect per- CAN messages Check the TCU con- MESSAGE ceived by the from TCU nection with the CAN CAN driver. (Transmission line. TSC1-VR Control Unit) in- consistent. 2C9 ERROR No effect per- CAN messages Check the tachograph MESSAGE ceived by the from TC (tacho- connection with the CAN TIME- driver. graph) inconsist- CAN line. DATE ent. 2D3 ECU No effect per- Poor control Reprogram the central OVERRUN ceived by the unit program- unit. If the error is re- MONI- driver.
ming/flash peated, replace the TORING Possible internal central unit, if needed. ERROR fault. DTC FMI Failing component Type of Failure Visible failure Possible Cause Repair action Checks to be performed Measuring conditions Values to be detected Remarks 2AF SERIOUS EOBD FAULT FROM DE- NOX- TRONIC (EOBD FLASHING LIGHT) No effect per- ceived by the driver. Problems in Ad- Blue dosing sys- tem. Check the faults in the Denoxtronic and con- sult the control unit troubleshooting guide. 2B4 TIMEOUT CAN MESSAGE BC2EDC2 No effect per- ceived by the driver. CAN configur- ation incorrect. CAN connec- tions defective. Terminal resis- tance not suit- able. Check CAN line wiring.
Check BC wiring and operation. 2C6 TIMEOUT OF CAN MESSAGE TSC1-PE PASSIVE No effect per- ceived by the driver. CAN messages from TCU (Transmission Control Unit) in- consistent. Check the TCU con- nection with the CAN line. 2C8 ERROR MESSAGE CAN TSC1-VR No effect per- ceived by the driver. CAN messages from TCU (Transmission Control Unit) in- consistent. Check the TCU con- nection with the CAN line. 2C9 ERROR MESSAGE CAN TIME- DATE No effect per- ceived by the driver. CAN messages from TC (tacho- graph) inconsist- ent. Check the tachograph connection with the CAN line. 2D3 ECU OVERRUN MONI- TORING ERROR No effect per- ceived by the driver.
Poor control unit program- ming/flash Possible internal fault. Reprogram the central unit. If the error is re- peated, replace the central unit, if needed.