Iveco — 603.93.641-3Cp

21 T RAKKER E URO 4/5 CLUTCH  Base - November 2006 Print 603.93.641/A Revi - June 2007 BLEEDING CLUTCH CIRCUIT Figure 29 1 Bleed air from clutch hydraulic circuit after repairing clutch assembly or following periodic oil changes. Use air remover 99306010 for this purpose as follows: - introduce compressed air into reservoir (5); - fill reservoir (4) with Tutela TRUCK DOT SPECIALfluid; - replace clutch reservoir cover ( ) with one of those provided with device 99306010 and connect device line to cover.

Figure 30 40355 - apply a plastic pipe to bleed screw (2) of slave cylinder (1) and immerse the opposite end of the pipe in a recipient containing Tutela TRUCK DOT SPECIAL fluid. Undo bleed screw (1) by one turn, open (see Figure 29) crock (2) until pressure gauge (3) shows a reading of 1 1,2 bars; - when clutchfluidemerging from circuit is free of bubbles, tighten bleed screw and drain air from device reservoir (5) through valve (6).