F2B ENGINE 53 T RAKKER E URO 4/5 PRINT603. 93.641 By Print 603.93.641 Base q November2006 Figure 50 47575 tighten screws (2) fixing the connecting rod cap (3) and move it. Remove the connecting rod-piston assembly from e upper side. Repeat these operations for the other pistons. Figure 51 47576 means of proper and splined wrenches, untighten the ews (1) and (2) and remove the lower crankcase (3). Figure 52 47570 move the crankshaft (2) with tool 99360500 (1). Figure 53 47571 Remove thecrankshaft half-bearings (1), untighten the screws and remove oil spray nozzles (2). Take down cylinderliners asspecified in the relative paragraph on page 56.
NOTE After disassembling the engine, thoroughly clean disassembled parts and check their integrity. Instructions for main checks and measures are given in the following pages, in order to determine whether the parts can be re-used.