PROCESS UNIT hp Color 9850mfp 4.9 Replacing the belt separation claw A. Periodically replaced parts/cycle • Belt separation claw: Every 600,000 copies B. Procedure 1. Remove the transfer belt unit. (See " 4.5 Remov- ing and reinstalling the transfer belt unit. ") 2. Remove the screw [1] and then remove the sep- [3] aration claw unit [2]. Note: • Be careful not to touch and/or damage the • When reinstalling the separation claw unit, be transfer belt [3] with bare hands. [4] sure to apply setting powder to the semicircle [4] of the transfer belt [3]. III DIS./ASSEMBLY [2] [2] [1] 3. Remove the screws [1], one each, and then remove 3 transfer belt separation claws [2]. 4.
Reinstall the above parts following the removal steps in reverse. [1] [2] 3-40