hp Color 9850mfp PROCESS UNIT 4.10 Replacing the transfer belt A. Screw that must not be removed Note: • The screw [1] shown in the drawing below are not allowed to be removed. Be careful not to remove them. [1] B. Periodically replaced parts/cycle • Transfer belt: Every 200,000 copies III DIS./ASSEMBLY C. Procedure 1. Remove the transfer belt unit. (See " 4.5 Remov- ing and reinstalling the transfer belt unit. ") 2. Remove the belt cleaning unit. (See " 4.6 Replacing the belt cleaning unit. ") 3. Remove the separation claw unit. (See " 4.9 Replacing the belt separation claw .") 4. Remove 2 tension springs [1]. [1] [1] 3-41