FIXING hp Color 9850mfp 4. Remove 2 screws [1] and open the fixing upper unit [2]. Note: • The screw [1] is a shoulder screw. When attaching it, be sure to set the shoulder sec- tion securely into the screw hole. [1] [1] [2] III DIS./ASSEMBLY 5. Remove 2 faston terminals [1] at the front, and a clamp fixing screw [2], 2 faston terminals [3] and a screw [4] at the rear. And then remove the fix- ing plate [5] and pull out gently the fixing heater lamps 1 and 2 [6] from the fixing roller U [7] for removal. [1] Note: • When removing the faston terminal, be sure to hold it at the connector. [2] [7] 6. Reinstall the above parts following the removal steps in reverse. [3] [6] Note:
• Be sure to reinstall the fixing heater lamp so that the manufacturer's label indication comes to therear. • When reinstalling the fixing heater lamps, please note that the lamp fitting holes on the fixing plate are different. [4] [5] 3-80