hp Color 9850mfp FIXING 9.4 heater lamp Replacing the fixing lower A. Periodically replaced parts/cycle • Fixing lower lamp (L4): Every 2,500,000 copies B. Procedure 1. Remove the fixing unit. 2. Remove 2 screws [1] and then remove the fixing cover R [2]. Note: [2] • Be careful not to touch the glass section of the fixing heater lamp with bare hands. This may shorten the effective life of the heater lamp. • Be careful not to damage the surface of the [1] fixing heater lamp. Especially when removing or reinstalling it, care should be taken not to contact and damage the inner surface of the III DIS./ASSEMBLY fixing roller.
• When the installation is completed, check to see if the fixing heater lamp is set securely to the fixing plate and the faston terminal is properly installed. 3. Remove the connector [1] and take out the web motor wiring harness [3] from the clamps [2] at [3] the 3 places. [2] [1] 3-81