Q5686A/Q5687A DISASSEMBLY/ASSEMBLY 3. Remove 3 clamp screws [1], a ground screw [2], the paper exit opening solenoid (SD704) con- [2] nector [3] and the main tray paper exit sensor (PS706) connector [4]. [3] [1] [4] 4. Remove E-rings [1] and bearings [2], two each, provided at front and rear, and then remove the [1] [2] 5. Reinstall the above parts following the removal paper exit opening unit [3]. III DIS./ASSEMBLY steps in reverse. [2] [1] [3] 3-11