DISASSEMBLY/ASSEMBLY Q5686A/Q5687A 3. MAIN TRAY 3.1 Replacing the tray up / down motor Caution: • When removing the tray up/down motor, be sure to hold the main tray to prevent it from falling. A. Periodically replaced parts/cycle • Tray up/down motor (M703): Every 2,500,000 copies B. Procedure 1. Remove the rear cover. 2. After removing a connector [1], remove 2 III DIS./ASSEMBLY screws [3] while supporting the main tray [2] with your hand, and then remove the tray up/ down motor (M703) [4]. [2] 3. Reinstall the above parts following the removal steps in reverse. [3] [4] [1] 3-12