Q5686A/Q5687A DISASSEMBLY/ASSEMBLY 4. STACKER 4.1 Replacing the stacking assist roller A. Periodically replaced parts/cycle • Stacking assist roller: Every 400,000 copies B. Procedure 1. Open the finisher door. 2. Pull out the stacker unit. 3. Open the stacking assist section [1] and lift up the stacking assist roller [2]. [2] [3] 4. Remove the stop ring [3], and then remove the 5. Reinstall the above parts following the removal stacking assist roller [2]. steps in reverse. III DIS./ASSEMBLY [1] 4.2 Removing and reinstalling of the stacker unit cover A. Procedure 1. Open the finisher door. 2. Remove 5 screws [1] and then remove the [2] 3.
Reinstall the above parts following the removal stacker unit cover [2]. steps in reverse. [1] 3-17