Q5686A/Q5687A DISASSEMBLY/ASSEMBLY 5. Remove 4 screws [2] of the clincher R [1] and the ground [3]. [1] [2] [3] 6. After removing 2 screws [1] and the ball bearing spring mounting bracket [2], rotate the clincher [3] R [3] to the position in which it can be easily taken out, and then remove the connector [4]. III DIS./ASSEMBLY Note: • Be careful not to lose the bearing spring [5] and the ball. 7. Reinstall the above parts following the removal [4] steps in reverse. [5] [1] [2] 3-23